Toshiba 22AV703 Specifications download pdf (Page 9)

English

Connecting an HDMI or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an

HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-

rial in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top

box or DVD player with HDMI or DVI output). For acceptable video signal formats.

Note:

• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of

a new standard.

Please unplug your HDMI cable rst and then try setting the following options (Lip Sync) to “Off”.

Your early HDMI source should operate properly with your television.

• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) to

the HDMI terminal.

For proper operation, it is recommended that

you use an HDMI cable with the HDMI Logo

( ).

• If your HDMI connection is capable of 1080p

and/or your television is capable of refresh

rates greater than 50Hz, you will need a Cat-

egory 2 cable. Conventional HDMI/DVI cable

may not work properly with this mode.

• HDMI cable transfers both video and audio.

Separate analogue audio cables are not

required (see illustration).

The HDMI 3 terminal is located on the side of

the television.

HDMI OUT

VIDEO AUDIO

L R

OUT

HDMI cable

HDMI device

For instruction

purposes only

To view the HDMI device video, press the

button to select HDMI 1, HDMI 2 or HDMI 3

mode.

To connect a DVI device

Connect an HDMI-to-DVI adapter cable (HDMI

type A connector) to the HDMI 1 terminal and

audio cables to the PC/HDMI1 (AUDIO) socket

(see illustration).

• The recommended HDMI-to-DVI adapter

cable length is 6.6ft (2m).

• An HDMI-to-DVI adapter cable transfers

video only. Separate analogue audio cables

are required.

For instruction

purposes only

the back of your television

Computer

Audio cable for PC to

television connection

(not supplied)

HDMI-to-DVI

adapter cable

Note:

To ensure that the HDMI or DVI device is reset

properly, it is recommended that you follow

these procedures:

• When turning on your electronic components,

turn on the television rst, and then the HDMI

or DVI device.

• When turning off your electronic components,

turn off the HDMI or DVI device rst, and then

the television.

[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,

which is being standardized for reception of high-denition video signals. Because this is an evolving technology, it is possible that

some devices may not operate properly with the television.

HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Comments to this Manuals

No comments

Toshiba 22AV703 Specifications Page 9

Comments to this Manuals

Related products and manuals for LCD TVs Toshiba 22AV703