Toshiba Satellite NB10T-A User Manual download pdf (Page 55)

Use only memory modules approved by TOSHIBA.

Do not try to install or remove a memory module under the following

conditions.

a. The computer is turned on.

b. The computer was shut down in either Sleep or Hibernation Mode.

c. Wake-up on LAN is enabled.

d. The wireless communication function is on.

Be careful not to let screws or other foreign matter fall into the

computer. It could cause malfunction or electric shock.

Additional memory module is a precision electronic component that

may be fatally damaged by static electricity. Since the human body

can carry static electricity, it is important that you discharge yourself

before touching or installing any additional memory modules. To

discharge your body’s static electricity, simply touch any metal close to

you with bare hands.

Use a point size 0 Phillips screwdriver to remove and fasten the screws -

the use of an incorrect screwdriver can damage the screw heads.

Removing a memory module

To remove the memory module, follow the steps as detailed below:

1. Click Power in the Settings charm, and then select Restart.

2. Hold down the F2 key and then release this key one second after the

computer is power on - the BIOS setup utility will load.

In the BIOS setup screen, select Exit -> Disable Built-in Battery,

and Power Off.

3. Remove the AC adaptor and all cables and peripherals connected to

the computer.

4. Close the display panel and turn the computer upside down.

5. Loosen the screw securing the memory module cover in place.

User's Manual

4-11

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 115 116

No comments

Toshiba Satellite NB10T-A User Manual Page 55