Toshiba NB520 User Manual download pdf (Page 55)

7. Align the notch of the memory module with that of the memory slot

and gently insert the module into the slot at about a 30 degree angle

before holding it down until the latches on either side snap into place.

Figure 3-12 Seating the memory module

1. Notch 2. Slot

Never allow metal objects, such as screws, staples and paper clips, to

enter the computer. Foreign metal objects can create a short circuit,

which can cause computer damage and fire, possibly resulting in

serious injury.

Do not touch the connectors on the memory module or on the

computer. Debris on the connectors may cause memory access

problems.

Align the grooves along the edges of the memory module with the

locking tabs on the connector and insert the module into the connector

firmly - if you find it difficult to install the memory module, gently prise

the locking tabs outwards using the tip of your finger.

Please also ensure that you hold the memory module along its left and

right hand edges - the edges with the grooves in.

NB520 series

User's Manual 3-21

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 128 129

No comments

Toshiba NB520 User Manual Page 55