TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK1214GAP (HDD2149) 2.5-INCH HARD DISK DRIVE USER MANUAL
8 DRIVE CONNECTORS – MK1214GAP (HDD2149) Figure 1.MK1214GAP HDD Rear View - Connectors Interface Connector Drive Side Connector Yamaichi GAP05
9 Interface Pin Assignment DRIVE INTERFACE SIGNALS PIN SIGNAL PIN SIGNAL 1 RESET 2 GROUND 3 DD 7 4 DD 8 5 DD 6 6 DD 9 7 DD 5 8 DD 10 9
CONTENTS Introduction...1 Setup ...
1 INTRODUCTION – MK1214GAP (HDD2149) General Features • 2.5" sized drive • 2 Platter • 12.072 Gigabytes* • 9.5mm High • 13ms Avera
2 SETUP – MK1214GAP (HDD2149) Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Elec
3 Installation Notes The drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion. In order t
4 USING THE HARD DISK DRIVE – MK1214GAP (HDD2149) Backing up Data Files To avoid data loss, regularly back up the data files on the hard disk d
5 TROUBLESHOOTING – MK1214GAP (HDD2149) Problem Solution My system is not able to recognize all available capacity on my Hard Disk Drive. What
6 SPECIFICATIONS – MK1214GAP (HDD2149) General Model MK1214GAP (HDD2149) Interface ATA-2/3/4 Functionality Formatted Capacity 12.072GB*Rotationa
7 Physical Height 0.37" (9.5mm) Width 2.75" (69.85mm) Depth 3.94" (100mm) Weight 3.49oz (99g) typ Regulatory The drive satisfies the
Comments to this Manuals