Toshiba GA-1120 User Manual download pdf (Page 62)

4-10 Performing Setup from the Control Panel

Server Setup options

The Server Setup menu lets you specify system information that pertains to the

GA-1120 and all users. Accessing the menu is described on page 4-8.

When you choose Server Setup, the options appear in sequence, as follows. Default

values, where applicable, appear in square brackets. Words shown in italics indicate

that a product- or site-specific value is displayed.

Server Name

Default server name

Enter a name for the GA-1120 (up to 15 characters long). This name appears in the

Chooser on an AppleTalk network.

NOTE: Do not use the device name (Color-MFP) as the server name. Also, if you have

more than one GA-1120, do not give them the same name. Linux is not designed to

handle two computers with the same name in the same workgroup or domain.

System Date

Enter the correct system date in the standard form for your use. The date appears on

the Job Log.

System Time

Enter the correct system time. Enter the time based on the 24-hour clock in the form

HH:MM (Hours:Minutes). The time appears on the Job Log.

Print Start Page

Yes/No [No]

Specify whether the GA-1120 should print a start page every time it restarts. The start

page displays information about the GA-1120, including the server name, current date

and time, amount of memory installed in the GA-1120, network protocols enabled,

and connections published.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 167 168

No comments

Toshiba GA-1120 User Manual Page 62