Toshiba SATELLITE P500 User Manual download pdf (Page 79)

Getting Started

Using external display devices

6 Click OK.

In the future you can change the display settings by pressing Fn+F5,

or by configuring the display properties settings.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can

choose to use the internal display only, the external device only, or

both simultaneously.

Some modes are only available with the appropriate device attached

and turned on.

The quickest way to change the display output settings is to use the

display hot key (

Fn + F5):

1 Press

Fn and F5 simultaneously.

2 While holding down

Fn, press F5 repeatedly until the setting

you want takes effect. Briefly pause each time you press the

key to allow time for the display to change.

This hot key cycles through the settings in the following order:

❖ Built-in display only

❖ Built-in display and external monitor simultaneously

❖ External monitor only

❖ TV (or other external video device) only

❖ Built-in display and TV (or other external video device)

simultaneously

❖ Built-in display and external monitor (extended desktop)

❖ Built-in display and TV (extended desktop)

NOTE

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 253 254

No comments

Toshiba SATELLITE P500 User Manual Page 79